Industrial Combustion - LN Series -Low NOx..

		351 - 21st Street Monroe, Wisconsin - 53566 Phone: 608.325.3141

LN-Series
We at Industrial Combustion continue to develop lower emission units in advance of the lower emission standards that are set for the future.

Features Include:

Flue Gas Recirculation control valve insures
proper metering of F.G.R for maximum NOx reduction
FGR Shutoff Valve prevents combustible gases
from returning to the combustion zone
FGR damper assembly
Cam trim for consistent air/fuel ratios
Hinged air housing for easy access/servicing
< 30 PPm Design, < 20 PPm Design

Specifications

Capacities and Specifications

Burner Size	42P	54P	63P	84S	84P	105P	145S	145P	175	210	252	300	315	336	378	378
Oil Input(U.S. gph)	24	30	38	45	53	60	75	90	105	120	150	180	215	225	240	270
Gas Input(Btu/hr, 000)	3,360	4,200	5,250	6,300	7,350	8,400	10,500	12,600	14,700	16,800	21,000	25,200	29,400	31,500	33,600	37,800
Boiler Horsepower	80	100	125	150	175	200	250	300	350	400	500	600	700	750	800	900
Impeller Motor Horsepower	3	5	5	5	7.5	10	15	15	20	25	30	40	60	60	60	60
Compressor Module Horsepower	3	3	3	3	3	3	3	3	5	5	5	7.5	7.5	7.5	15	15
Metering Unit Horsepower	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.75	0.75	0.75	0.75	0.75	1	1

Gas Based:

Model	Fuel
LNDG	Gas

Oil Based:

Model	Fuel
LNDL	No. 2 Oil
LNDE	No. 2 - 6 Oil
LNDM	No. 2 - 5 Oil

Gas/Oil Based:

Model	Fuel
LNDLG	Gas/No. 2 Oil
LNDMG	Gas/No. 2 - 5 Oil
LNDEG	Gas/No. 2 - 6 Oil

Notes:

Firing rates based on altitudes to 2000ft. above sea level. For firing rates at higher altitudes, consult factory. Gas input based on 1000 Btu/cu. ft. and .60 specific gravity oil input based on 140,000 Btu/gal.
Boiler overall efficiency of 80% estimated. Indistrial Combustion does not gauarantee overall boiler efficiency.
Furnace pressure and furnace dimensions and required NOx emissions may allow higher firing rates than shown above, consult factory